Speedliner® FAQ'S
What type of warranty do you give?
SPEEDLINER® Ute decks are warranted for 3 years from the date of application,
against normal wear and tear.
Do you offer colour's?
We offer 18 factory stock colour's: black, dark
green, emerald green (metallic), medium green, camouflage green, yellow, white,
red, garnet red (metallic), petrol blue, dark blue, indigo blue (metallic),
medium blue, camouflage brown, orange, charcoal grey, medium grey.
SPEEDLINER® can also be colour matched to most vehicles using standard urethane colour matching techniques - even to metallics. Ask us or your Dealer for details. Click here to find your local Dealer.
How thick is the bedliner?
Based on our proven fantastic strength, our recommended thickness is 2.5mm
or a little less than 1/8 of an inch; however, SPEEDLINER® can be sprayed
thicker for an additional charge if required.
back
to top
What are the differences between SPEEDLINER® and other brands?
Higher tensile and tear strength give us better protection. We can increase
even further our already unequalled cut & tear strength with the Kevlar® fibre
additive. The Kevlar® option is available exclusively from SPEEDLINER®,
none of our competitors can offer this. A SPEEDLINER® spray on liner
is far less likely to rip or tear than our competitors. We also offer stronger
UV protection from the sun’s harmful rays. This means SPEEDLINER® holds
its colour better than our competitors and will not "chalk" over
time that you may often see with other products. For technical information
and product comparison with other liners click here.
back to top
Can you do graphics?
With SPEEDLINER® all types of graphic creations are possible. Ask you nearest
Dealer/Application Centre to confirm their graphics capability. Find
your Dealer.
back
to top
How long does it take to spray?
Times vary depending on the size of the vehicle, but a vehicle is normally
needed for about 24 hours to complete the job.
back
to top
How much does it cost?
Pricing for SPEEDLINER® application starts from $750
back
to top
Can it be applied to wood, concrete, fibreglass, etc.?
SPEEDLINER® can be applied to many surfaces for many applications. Our
rule of thumb tells us that if it can be painted, it can probably be coated
with SPEEDLINER®. Visit a Dealer / Application Centre for more details.
back
to top
Is it chemical resistant?
SPEEDLINER® has great resistance to many chemicals. Your local Dealer will
have a comprehensive list of tests showing how SPEEDLINER® performs against
different chemicals.
back
to top
How long does it take to dry before using it?
SPEEDLINER® usually becomes dry to the touch in about 1 to 2 hours at average
room temperature (62°-68° F). SPEEDLINER® will be capable of light
use after 24 hours. Full cure to achieve our proven fantastic strength takes
3 to 5 days depending on temperature. Of course you can use your vehicle with
sensible care during this cure time. Colder weather may slow the full cure
time slightly but SPEEDLINER® will still achieve full functional strength.
back
to top
Can I clean it with Armor All?
Armor All will not harm SPEEDLINER®, we do not recommend using it however
due to making the deck slippery. Our liners do not chalk as our competition
do.
back
to top
Can you spray over the rails / topcaps?
Yes, SPEEDLINER® can be sprayed over rails / topcaps, giving added protection
against side loading and chafing damage from hard tops / canopies.
back
to top
Why do you use Kevlar®?
Kevlar® Fiber is an optional additive used to greatly
enhance cut & tear
strength. It is recommended on heavy-duty/hard use trucks and and high impact
areas. Kevlar® is not available with any other spray on liner!
back
to top